MPU-RGT-DS-ROT-1600_scritta_alta_ruotato

MPU RGT DS ROT

At Maklaus we develop our products so that they guarantee high performance and they can be easily integrated with existing production lines Our goal is to provide customers with suitable tools to produce precise holes at high running speeds with flexible materials such as plastic film, paper and coupled materials on a moving web.

MPU RGT DS ROT is Maklaus’ top of the range solenoid activated mechanical hole punching unit It allows customers to machine flexible materials moving at high speed performing fully customizable hole patterns based on specific requests.

MPU RGT DS ROT is a double sided hole punching unit where punching tools can be mounted on both sides of the unit This feature enables the possibility to increase hole punching frequency and machining speeds, as weel as reduce horizontal hole distances for specific hole patterns.

Technical Specs
Hole diameter2mm to 50mm*
Min. horizontal hole distance10mm*
Vertical hole distancecustomizable
Max. perforation frequency60Hz**
Max. material speed250m/min*
Max. material width6.000mm
Max. material thickness800μm**
Bridge framedouble
Software 4.0 ready***included
Suction systemincluded
ROT systemincluded

Optional
Photocell for printed materials
Acoustic and protective shield
Trolley

Machinery Options
Round holes
Special holes (euro hole, handles, butterfly holes, ecc.)
Pre cuts for easy openings
Customized holes and shapes with different diameter

*Depending on the type of punching unit installed and on the material to be processed
**Depending on machined material type and quality , hole pattern configuration set, temperature and humidity conditions of the production room.
***Possibility of real time production monitoring, work cycles recording, KPI (Key Performance Indicators ) visualisation , alarm history recording, machine usage statistics and reports.

The ROT system is an integrated device that opens and closes the punching unit frame to facilitate the operator during set up and alignment process of the punching tools on the bridge Maintenance is carried out safely without interrupting production.

Exploiting MHD technology (Multi Hole Diameter Maklaus’ punching units can make several holes with differen t diameters and shapes with the same punching tools offering customers an extensive variety of machining solutions with a limited amount of spare parts.